• Forged/milled 6061 aluminum body. Charcoal grey anodized finish.Also features 303 stainless steel face plugs and backweighted bars. Putter head weight is 355 grams.
  
• Features patented and USGA conforming, RollGroove Technology.™ LieAline Fitting System, and Four-Point Stability weighting.
  Lining up center vertical notch with cavity alignment line guarantees consistent setup.
  
• 85% Face balanced (slightly toe down) with no offset shafting.
  
• Available in right-handed 33", 34", 35", and left-handed 35" shaft length and 71 degree lie angle. Available in offset and straight shaft
  
• Each putter includes a head cover,LieAline bending tool and Speed Weight Kit.
  

• Forged/milled 6061 aluminum body. Charcoal grey anodized finish.Also features 303 stainless steel face plugs and backweighted bars. Putter head weight is 355 grams.
  
• Features patented and USGA conforming, RollGroove Technology.™ LieAline Fitting System, and Four-Point Stability weighting.
  Lining up center vertical notch with cavity alignment line guarantees consistent setup.
  
• 85% Face balanced (slightly toe down) with no offset shafting.
  
• Available in right-handed 33", 34", 35", and left-handed 35" shaft length and 71 degree lie angle. Available in offset and straight shaft
  
• Each putter includes a head cover,LieAline bending tool and Speed Weight Kit.
  

Mr. Beasley, a mallet style putter, honors the memory of one of our original founders. 100% CNC Milled from soft 303 stainless steel this putter features a wide heel and toe flange and a large sight line for ease of alignment. The Mr. Beasley had a 2nd Place Finish on the PGA Tour in 2005 and is looking forward to a very successful season in 2006.

Available Lengths: 33" to 36" (custom)
Grip: Rife Custom Winn - Pistol and Midsize
Shaft: FM Precision Straight Taper
Offset: One Shaft
Head Weight: 345 grams
Swing Weights: 34"= D9, 35"= E5
Material: CNC milled 303 Stainless Steel

Purchase

The Aussie, named to honor our good friends down under, found immediate success on Tour in late 2005. This classic heel and toe cavity back design features a short slant hozel for superb alignment capabilities and is 100% CNC Milled from soft 303 stainless steel. A number of players instantly put the Aussie into play and still have it in the bag for the 2006 Tour season.

Available Lengths: 33" to 36" (custom)
Grip: Rife Custom Winn - Pistol and Midsize
Shaft: FM Precision Straight Taper
Offset: One Shaft
Head Weight: 345 grams
Swing Weights: 34"= D9, 35"= E5
Material: CNC milled 303 Stainless Steel

Purchase

Tradition meets innovation in designer Guerin Rife’s interpretation of the classic Anser style putter introduced originally back in the 1960’s. As part of what is being called the Island Series line for 2007, the new “Antigua” features Rife’s trademark vertical alignment notch and patented RollGroove face technology that produces a quicker roll and a softer feel. The Antigua also features a long elegant slant hosel creating a full shaft offset and slight toe down balance. As with all Rife putters the Antigua is 100% milled and made of mild 304 stainless steel.

Available Lengths: 34" to 35" (right handed)
Grip: Rife Custom Winn - Pistol
Shaft: FM Precision Straight Taper
Offset: One Shaft
Head Weight: 345 grams
Swing Weights: 34"= D9, 35"= E5
Material: CNC milled 304 Stainless Steel

Purchase

Like all putters from Rife the Barbados is Tour driven. Since its introduction on the PGA Tour late 2006 this oversized mallet putter has found its way into the bag of three of the top 50 players on the PGA Tour whom have enjoyed immediate success (winner of the 2006 Australian Masters). The Barbados is designed to have a pleasing shape wrapped around a three line center cavity section creating a strong alignment aid. By moving the mass to the outer edges of the putter, the Barbados is extremely stable. It also features both RollGroove and LieAline technologies. As with all Rife putters the Barbados is 100% milled and made of mild 304 stainless steel.

Available Lengths: 34" to 35" (right handed)
Grip: Rife Custom Winn - Pistol
Shaft: FM Precision Straight Taper
Offset: One Shaft
Head Weight: 345 grams
Swing Weights: 34"= D9, 35"= E5
Material: CNC milled 304 Stainless Steel

Purchase | In the News

A new concept from putter designer Guerin Rife, the Martinique is five inches long with a large center cavity area pushing the weight to the extreme heel and toe for incredible stability. Its key design innovation features an inline shafting that promotes a square face to the target line at address. The shaft and the top edge of the face are identical in width and create a single line when the putter is squarely aligned behind the ball at address. This unique feature has already gained the attention of players on both the PGA and Champions Tours where it is already in play. The Matinique is 100% milled from mild 304 stainless steel features Rife’s trademark vertical alignment notch and patented RollGroove face technology for a quicker roll and softer feel.

Available Lengths: 34" to 35" (right handed)
Grip: Rife Custom Winn - Pistol
Shaft: FM Precision Straight Taper
Offset: One Shaft
Head Weight: 345 grams
Swing Weights: 34"= D9, 35"= E5
Material: CNC milled 304 Stainless Steel

Purchase